AEM - Yardmaster Solids Pumps

The main feature of Yardmaster Pumps is their ability to run dry. This means that careful watching of slurry levels is not necessary. Also there are no submerged bearings that can rust or seize.

Yardmaster Pumps can be found in use from dairy sheds to meat processing plants, to wool scourers and to sawmills shifting sawdust.

Most waste products, solids and slurries can prove a problem to dispose or shift. The main problem lies in shifting them through a pump without clogging. Where small solids need to be shifted without great volumes of water, the solids can be screened off at the end point of delivery and the water recycled.

The Yardmaster Pumps are designed to handle all these problems no matter what the size of the solid, the volume or the lift.

Features
The non-clog impeller partially macerates soft materials so that solids will not pass into the line and cause blockages. The Yardmaster will also pump solids such as sand and gravel with ease. The pump is also self-priming and can be run dry. The Deflecting Shaft can move up to 15mm either side of the centre which allows the impeller to "walk" over obstacles until they are cleared. The small model Yardmasters have a By-Pass that agitates the liquid and solids around the pump head so that the solids are continually taken up with liquid. The By-Pass also functions as a secondary inlet whilst the impeller cuts away the lumps which may temporarily have obstructed the main flow. Fluid velocity in the line is maintained. The Heavy Duty Bearings above the liquid level. The feature makes them trouble free and long wearing. The Motor is supplied mounted on top of the pump, away from any moisture or obstruction. No special fittings or guards are needed. Pumps can be provided for belt driven, hydraulic, air, petrol and diesel power drive.
Application
Dairy Farming - spreading cow shed wastes back onto pastures through an irrigation nozzle. Effluent is an excellent form of fertiliser. Piggery - shifting the pig effluent and wastes away either irrigated back onto the pasture or into settling ponds. Poultry Effluent - shifting chicken effluent from the sheds to screens or direct application to the field. Abattoirs and Freezing Works - shifting slaughter board wastes including blood, offal, trimmings, legging papers, meat trimmings, fat. Chemical Plants - shifting and mixing chemical products. Stainless Steel shafts and impellers can be fitted to handle acids. Chicken Abattoirs - shifting feathers, feet, offal and whole reject birds. Dairy Industry - shifting waste products from the factory to ponds or fields. Food Processing Factories - shifting wastes and washing fluids. Fish Industry - shifting fish heads, tails, skins and offal. Quarries and Mines - shifting flood water, gravel and coal. Sewage Treatment Plants - shifting comminute and raw sewage. Sawmills - shifting sawdust away from the plant. Wool Scourers - shifting the wood washings away from the scouring plant. Coal Mines - shifting coal from the mine face to the point of delivery. Where there is a combination of slurry waste and solids and water, then a Yardmaster will shift it efficiently and economically without a major clogging problem.

Features

The non-clog impeller partially macerates soft materials so that solids will not pass into the line and cause blockages. The Yardmaster will also pump solids such as sand and gravel with ease. The pump is also self-priming and can be run dry.
The Deflecting Shaft can move up to 15mm either side of the centre which allows the impeller to "walk" over obstacles until they are cleared.
The small model Yardmasters have a By-Pass that agitates the liquid and solids around the pump head so that the solids are continually taken up with liquid. The By-Pass also functions as a secondary inlet whilst the impeller cuts away the lumps which may temporarily have obstructed the main flow.
Fluid velocity in the line is maintained.
The Heavy Duty Bearings above the liquid level. The feature makes them trouble free and long wearing.
The Motor is supplied mounted on top of the pump, away from any moisture or obstruction. No special fittings or guards are needed. Pumps can be provided for belt driven, hydraulic, air, petrol and diesel power drive.

Application

Dairy Farming - spreading cow shed wastes back onto pastures through an irrigation nozzle. Effluent is an excellent form of fertiliser.
Piggery - shifting the pig effluent and wastes away either irrigated back onto the pasture or into settling ponds.
Poultry Effluent - shifting chicken effluent from the sheds to screens or direct application to the field.
Abattoirs and Freezing Works - shifting slaughter board wastes including blood, offal, trimmings, legging papers, meat trimmings, fat.
Chemical Plants - shifting and mixing chemical products. Stainless Steel shafts and impellers can be fitted to handle acids.
Chicken Abattoirs - shifting feathers, feet, offal and whole reject birds.
Dairy Industry - shifting waste products from the factory to ponds or fields.
Food Processing Factories - shifting wastes and washing fluids.
Fish Industry - shifting fish heads, tails, skins and offal.
Quarries and Mines - shifting flood water, gravel and coal.
Sewage Treatment Plants - shifting comminute and raw sewage.
Sawmills - shifting sawdust away from the plant.
Wool Scourers - shifting the wood washings away from the scouring plant.
Coal Mines - shifting coal from the mine face to the point of delivery.
Where there is a combination of slurry waste and solids and water, then a Yardmaster will shift it efficiently and economically without a major clogging problem.