'Compact C' Progressive Cavity Pumps
The 'Compact C' series uses the famous helical rotor pumping principle. The heart of the pump is the single
helix rotor which rotates eccentrically within a double helix resilient stator of twice the pitch length of
the rotor.
The rotor of circular cross section creates a continuously forming cavity as it rotates. The
cavity progresses towards the discharge end, advancing in front of a continuously forming seal line,
carrying the pumped material with it. As the stator open cross sectional area is always constant, the
flow rate is continuous without pulsation.
| Features |
|---|
- Flowrates up to 63 L/s
- Pressures of up to 240 metres
- Up to 8.5m suction lift
- Temperatures between -10°C and 100°C
- Capacity is proportional to speed
- Can handle viscous materials
- Minimal damage to shear sensitive products
- Pulsation free operation
- Can handle tri-phase liquids (i.e. solids, gases and
liquids)
- Can be installed vertically
or horizontally to suit the
application. Can be run
in either direction.
- Available in cast iron
or stainless steel, with a choice
of rotor and stator materials
to suit individual applications.
|
| Applications |
|---|
- Domestic and industrial effluents
- Hydrated lime slurry
- Sludge
- Shear sensitive latex emulsion
- Milk curds, sauces, fruit juices
- Industrial chemicals and detergents
- Starch slurries
- Coating clays, gypsum and silicate
- Paper stocks
- Agricultural slurries
|