Davey HM Series Horizontal Multistage
Compact, all stainless steel horizontal multistage centrifugal pump and motor unit.
| Features |
|---|
-
Horizontal multistage centrifugal
pump with all hydraulic parts in
stainless steel
- Suitable for high water temperatures
- Corrosion & wear resistant
- Axial suction & vertical discharge
- Compact design
- Easy to install
- Stainless steel impellers with high
efficiency impeller profile & thick
self-centring impeller neck rings
for
- High efficiency
- Reduced power consumption
- Low noise output
- Impellers mounted directly on
extended shaft
- Maximise performance per stage
- High efficiency
- Long motor & pump life
- Increased wear resistance
- Pump casing assembly attached
to motor bracket at 8 points with
oring seal
- Complete stainless casing
- Better sealing
- Longer service life
- Davey built, totally enclosed fan
cooled (TEFC) electric motor:
- Single-phase motors have built
in thermal overload protection
with automatic reset and 1.8m
long power lead and Australian
3 pin plug
- Sealed and greased for life
motor bearings
- Over sized drive bearing
- Longer life
- Easy service
- Economical & quiet running
- Automatic control options:
Davey Torrium,
Standard pressure switch & gauge,
Multiple pump system
- Versatile system design
- Simple automatic control
- Suitable for many applications
|
| Operating Data |
|---|
- Capacities up to: 26m³/hr(430 lpm)
- Pressure heads to: 65m
- Maximum operating pressure: 1000kPa
- Maximum suction pressure: 600kPa
- Temperature range: -15° to +105°C
- Maximum ambient temperature: 50°C
Suitable Fluids:
Clean, clear, non-corrosive, non-flammable liquids with no fibres and little sand / sillica or abrasives (maximum concentration 40g/m³).
|
| Applications |
|---|
Specific applications include:
- Water supply, boosting and transfer
- Irrigation and turf watering
- Wash down
- Emptying/filling reservoirs or tanks
- Water treatment (demineralisation, filtering etc)
- Commercial washing equipment
|