June 2009 Newsletter - Sent to over 1,400 subscribers

The main objective of the W22 WEG motor is to achieve high performance with maximum energy efficiency for lower life time cost.

The W22 features:

• High quality cast iron frame with better vibration bearing and noise reduction
• Fan covers with better impact resistance and lower noise
• Better heat dissipation in end shields to maximize the bearing life
• Lower overall operational temperature

Increased dielectric resistance in windings enables VFD operations up to 575V without any modification.

• Aerodynamic concept
• Noise level reduction
• Easier assembly
• Better air flow distribution over frame
• Increase of the mechanical strength

Reduced frame size per output increases the space utilization and handling while being eco friendly with lower material consumption.

• Minimum energy consumption in most of its designed life time with designed level of performance
• No unplanned maintenance
• Efficiencies above EF1 minimum required values

Increased internal space and terminal block more accessible to the user reflecting in an easier cable handling and cable connection. The dimensions were optimized to provide more space to the power supply cables inlet and to auxiliary connectors resulting in easier assembly.

Terminal box can be mounted on top, left or right site of the motor using the same frame.

AEM now offers equipment from Leroy Somer, including the LSK series of open DC motors.

The LSK series is available with power outputs of 2kw to 750kW, and frame sizes from 112 to 355.

The compact design of the motor offers high power to weight ratio, while the four large inspection doors and generously sized terminal box allow for easy installation and maintenance.

The large terminal box can be configured in multiple positions, and on some models can even be located on the rear of the motor.

The forced-ventilation unit is also multiposition, which allows for many possible configurations to suit almost any installation.

10kw to 250kw LSK motors are available ex stock Australia, other sizes available ex works France.

For more information or a quote, contact the team at AEM today!

0.37kW three phase fan motors, 415V 50Hz, 4 pole 1410rpm, 1.2 FL AMPS, star connection, IP55, Totally Enclosed Air Over Motor (TEAOM).

These 'air-over cooled' motors are specifically designed for direct coupling to a fan, which provides the necessary cooling for the motor.

Please also note these motors have no feet or mounting arrangements, they are generally used with a clamped band style mounting.

Don't pay $221
Now just $99 each inc GST
Only 8 Available

We welcome any comments or complaints regarding the AEM newsletter or our email updates - it's as easy as replying to our email.